HP Integrity NonStop H-Series - Manual (Page 71)

If you run into problems with imported ETK projects that you can’t fix, HP encourages you to contact
your HP Support representative.
Importing one or more ETK projects
To import one or more ETK projects associated with a solution, perform the following steps from
the NonStop Development perspective:
1. Select Import ETK Projects... from the NonStop Tools menu.
2. In the Import ETK Projects wizard, enter the path of the solution file associated with the ETK
projects (or select Browse... to browse for the solution file). The Projects: list will automatically
list and select all projects associated with the solution file.
3. Deselect any projects in the Projects: list that you don't want to import.
4. Ensure that the Copy projects into workspace check box is selected only if you want NSDEE
to copy the contents of ETK projects into your workspace; else, make sure the check box is
not selected.
5. Select Add project to working sets if desired. (See the Eclipse Workbench Guide for information
on working sets.)
6. Select Finish to import all selected ETK projects.
If the import completes without errors or warnings, NSDEE displays the following dialog (which
you can dismiss by selecting OK).
Figure 27 Import Projects Completed dialog (ETK imports)
If the import completes with errors or warnings, NSDEE displays a dialog similar to the following.
Select the link to the log file to open the log and view its contents. You can also view the log file
at a later time by opening it at this location:
workspace/.metadata/etkmigration/solution_name.log
Figure 28 Import Projects Warning dialog (ETK imports)
Importing NSDEE 2.x projects
To convert NSDEE 2.1 or 2.0 local projects to NSDEE 3.0 projects, use the Import NSDEE 2.x
Projects wizard. For details, see
“Import NSDEE 2.x Projects wizard” (page 72) . The import wizard
will convert NSDEE 2.x local projects to NSDEE 3.0 projects.
Importing NSDEE 2.x projects 71