Creating windows-hosted makefile projects – HP Integrity NonStop H-Series User Manual
Page 77
Figure 33 Select Configurations page (managed build project)
17.
Select Finish to dismiss the wizard and create your project.
Creating Windows-hosted makefile projects
To create a Windows-hosted project for which you will supply the makefile, perform the following
steps from the NonStop Development perspective:
1.
Select one of the following menu items from the New submenu of the File menu:
•
C Project
•
C++ Project
•
COBOL Project
•
pTAL Project
A new project wizard will be opened (such as the NonStop COBOL Project wizard shown in
) that is specific to the menu item you choose.
For projects containing a main entry point, choose a menu item that matches the language
the main entry point is written in. For projects not containing a main entry point, choose a
menu item that matches the predominant language to be used in the project.
2.
Enter a name for your project in the Project name: field.
3.
To create the project in a non-default location, deselect the Use default location check box
and enter a path in the Location field (or select Browse... to browse for a path).
4.
Expand the NonStop Makefile Project folder in the Project type list and select Empty Project.
5.
Select either one or both tool chains in the Toolchains list, depending on whether you want
to build for TNS/R, TNS/E, or both.
6.
Select Next > to continue to the Initial Build Settings page of the wizard:
Creating projects
77