HP LaserJet Pro 400 MFP M425 - Manual (Page 192)

1. Load the document onto the scanner glass or into
the document feeder.
2. From the Home screen on the product control
panel, touch the Copy button.
3. Touch the Settings button, and then scroll to and
touch the Optimize button. Touch the arrow
buttons to scroll through the options, and then
touch an option to select it.
4. Touch the Start Copy button to start copying.
Edge-to-edge copying
The product cannot print fully edge-to-edge. The maximum printing area is 203.2 x 347 mm (8 x 13.7 in),
leaving a 4 mm unprintable border around the page.
Considerations for printing or scanning documents with cropped edges:
● When the original is smaller than the output size, move the original 4 mm (1/6 inch) away from the
corner indicated by the icon on the scanner. Recopy or scan in this position.
● When the original is the size of the desired output, use the Reduce/Enlarge feature to reduce the image
so the copy is not cropped.
Clean the pickup rollers and separation pad in the document feeder
If the product document feeder experiences paper-handling problems, such as jams or multiple-page feeds,
clean the document feeder rollers and separation pad.
176 Chapter 8 Solve problems ENWW