HP XP P9500 Storage - Manual (Page 79)

Description Item
Status, continued • This icon is used for the following:
The pair is split. Status names are:
BC: PSUS
BC Z: Split/SUSPOP
The pair is being split in Quick Split mode. Status names are:
BC: PSUS(SP)PSUS
BC Z: V-Split/SUSPVS
The pool is full. Status name is:
FS, SS: PFUS
•
The pair is suspended. Status names are:
BC: PSUE
BC Z: Supend/SUSPER
For more information, see “Pair status definitions” (page 53) .
Secondary Volume •
LDEV ID: The S-VOL’s LDEV identifier.
•
LDEV Name: The S-VOL’s LDEV name.
• Port ID: The port name of the P-VOL LDEV’s LUN path.
For BC Z, a hyphen (-) is shown.
• Host Group Name: The host group name of the P-VOL LDEV’s LUN path.
For BC Z, a hyphen (-) is shown.
•
LUN ID: The LUN ID of the S-VOL LDEV's LUN path.
For BC Z, a hyphen (-) is shown.
•
Emulation Type: The S-VOL’s emulation type.
•
Capacity: The S-VOL’s capacity.
• CLPR: The S-VOL’s CLPR number.
(FS and SS only.) Snapshot Date
The date and time that a snapshot was acquired.
If you have not set a snapshot date for FS pairs, this item is blank.
For BC and BC Z, a hyphen (-) is shown.
(FS and SS only.) Pool Name (ID)
The pool name and identification number.
If you have not set a pool name for FS pairs, this item is blank.
For BC and BC Z, a hyphen (-) is shown.
(BC and BC Z only.) Copy Pace
The speed at which the split operation is performed.
Values: Faster, Medium, Slower
If you have not set a copy pace for FS pairs, this item is blank.
For FS and SS pairs, a hyphen (-) is shown.
The consistency Group ID CTG ID
The mirror unit number Mirror Unit
The LDEV’s topology identifier Topology ID
Click to open the Create Pairs wizard. Create Pairs button
Local Replications window 79