HP XP P9500 Storage - Manual (Page 63)

Table 10 RAID Manager Error Codes (continued)
Description SSB2 code
Because the P-VOL you specified was also a Cnt Ac-J P-VOL for delta resync, one of the following
errors occurred: 2078
•
The reverse copy operation was rejected because the Cnt Ac-J pair was not split (PSUS status).
•
The quick restore operation was rejected.
The pair operation was rejected because the P-VOL you specified was also a Cnt Ac-J P-VOL for delta
resync. 2079
The pair operation was rejected because the initialization process was being performed. 2086
The quick restore operation was rejected because the volume you specified as a P-VOL was undergoing
quick format 2089
The quick restore operation was rejected because the volume you specified as an S-VOL was
undergoing quick format. 208A
The volume you specified as a P-VOL was a Cnt Ac-S S-VOL. The split operation was rejected because
the status of the Cnt Ac-S pair was not Suspend. 2093
The volume you specified as a P-VOL was a Cnt Ac-S S-VOL. The Split operation was rejected because
the consistency time of the consistency group is not equal to the consistency time of the Cnt Ac-S pair. 2094
The quick restore operation was rejected because of one of the following: 2097
• The P-VOL was also a Thin Provisioning V-VOL, but the S-VOL was a normal volume.
•
The P-VOL was a normal volume, but the S-VOL also a Thin Provisioning V-VOL.
The quick restore operation was rejected because the emulation type of only one of the volumes in
the pair was OPEN-0V. 209B
The quick restore operation was rejected because the updated information about storage system
configuration was being backed up. 209C
The pair operation was rejected because the volume you specified as the P-VOL was a Mainframe
Fibre Data Migration volume. 209E
The pairs you specified contain the Cnt Ac-S asynchronous volumes. The quick restore operation was
rejected because the CLPRs of the P-VOL and S-VOL for the pair you specified were different. 20A0
The create pair operation was rejected because the P-VOL was a Thin Provisioning or Smart Tiers
V-VOL whose capacity was increasing. 20A2
The create pair operation was rejected because the S-VOL was a Thin Provisioning or Smart Tiers
V-VOL whose capacity was increasing. 20A3
The pair operation was rejected because the consistency group number you specified was being used
by FS or SS. 20A9
The pair operation was rejected because the volume you specified as the P-VOL was a Thin Provisioning
or Smart Tiers V-VOL and its zero pages were being reclaimed. 20AA
The pair operation was rejected because the volume you specified as the S-VOL was a Thin Provisioning
or Smart Tiers V-VOL and its zero pages were being reclaimed. 20AB
The pair operation was rejected because the volume you specified as the P-VOL was a Thin Provisioning
or Smart Tiers V-VOL and its capacity was increasing. 20B0
The pair operation was rejected because the volume you specified as the S-VOL was a Thin Provisioning
or Smart Tiers V-VOL and its capacity was increasing. 20B1
The pair operation was rejected because the volume you specified as the P-VOL was a Thin Provisioning
or Smart Tiers V-VOL, which was not associated with a pool. 20B4
The pair operation was rejected because the volume you specified as the S-VOL was a Thin Provisioning
or Smart Tiers V-VOL, which was not associated with a pool. 20B5
Troubleshooting with RAID Manager 63