HP TopTools - Manual (Page 39)

HP Toptools for Unicenter User Guide
Table 4-1. MIBs added by HP Web JetAdmin for Unicenter.
MIB File Date MIB File Date
ljS5000.mib 03/23/01 lj5.mib 03/23/01
ljS8000.mib 03/23/01 lj5Si.mib 03/23/01
ljSmbm.mib 03/23/01 lj5SiMop.mib 03/23/01
ljS8000stapler.mib 03/23/01 lj6P.mib 03/23/01
jd_master_mib.txt 03/23/01 ljS4000.mib 03/23/01
lj4V.mib 03/23/01
6. When the MIB files have been installed a Setup Complete dialog will be displayed. Click Finish.
You do not need to reboot your system. Note, some of these MIBs are also added as part of HP Toptools for
Unicenter.
4.1.1 Reinitialize Unicenter
After installing the HP Web JetAdmin for Unicenter bridge you should reinitialize Unicenter by running resetdsm.
Refer to “Step-by-Step Instructions” in Section 3.2.1 of this Guide for instructions on configuring and resetting
DSM for Unicenter environments.
4.2 Verifying a Successful Installation
Quick steps to verifying a successful installation:
• The Unicenter Worldview menu should now display an entry for Uninstall HP Web JetAdmin for Unicenter.
• Open a 2D map and look for new HP printer icons on systems known to be manufactured by HP.
• Select an HP printer on the map and raise the popup menu. The menu entry “HP Web JetAdmin Properties”
should appear.
• A new agent should appear within the printer Unispace.
4.3 Using HP Web JetAdmin for Unicenter
HP Web JetAdmin for Unicenter adds:
• Printer MIBs into Unicenter that can be accessed from the Object Browser.
• The ability to receive and monitor events through DSM.
• Customized icons that appear in browsers and maps.
• A launch to Web JetAdmin from Unicenter popup menus (as shown below).
Page 39