HP NonStop G-Series - Manual (Page 83)

Configuring the 5257/5257ACL Tape Drive for the
NonStop Himalaya S-Series Server
5257/5257ACL Installation and User's Guide for NonStop Himalaya S-Series Tape Enclosures — 522344-001
7 -7
Example 3: Deleting a Tape Drive From the System
(PMF/IOMF)
Example 3: Deleting a Tape Drive From the System (PMF/IOMF)
Use the SCF DELETE TAPE command to delete a tape drive from the system
configuration database.
Before issuing the DELETE command, use the SCF STATUS command to verify that
the tape drive is in the stopped state. For example:
->STATUS TAPE $TAPE0
If the STATUS command shows that the tape drive is not in the STOPPED state, use the
SCF STOP command to place the tape drive in the STOPPED state. For example:
->STOP TAPE $TAPE0
The following example removes tape drive $TAPE0 from the system configuration:
->DELETE TAPE $TAPE0
Use the INFO command to verify that the tape drive has been removed from the system:
->INFO $TAPE0*
For more information on the STATUS, DELETE, and INFO commands, see the SCF
Reference Manual for the Storage Subsystem.