HP NonStop G-Series - Manual (Page 50)

Installing and Configuring the 5257ACL Tape Drive
5257/5257ACL Installation and User's Guide for NonStop Himalaya S-Series Tape Enclosures — 522344-001
5 -8
Set Reserved Slots
Set Reserved Slots
Use this setting to make specified number of the slots in the magazine inactive. This
function can be used only in Random Operating Mode. At least one reserved slot is
required to use the Autoclean option.
Set Special Configurations
Use this option to choose between two lengths of the Mode Sense/Select Device
Capabilities Page (SCSI Page 1fH), which are 14 bytes and 18 bytes, to accommodate
different SCSI device implementations of their page.
Set Default
This option resets all of the preceding configuration options to their factory defaults.
Under no circumstances should this option be used.
Table 5-2 summarizes the configuration and default settings for the ACL. Other possible
settings are shown in the second column.
Table 5-2. 5257ACL Configuration Options (page 1 of 2)
Option Settings Default
Data Format Density: Auto Selection Auto
Compression: Enable, Disable (Enable at 10.0
only) Auto
SCSI Lib Bus Parity: Enable, Disable
Lib Bus ID: (SCSI ID)
SDLT1 Bus ID: (SCSI ID)
Enabled
3
5
Library Mode Random, Seq. SDLT1
Sequential Mode: Normal, Recirculate
Sequential
Normal
Element Base Transport: NNNN (hex)
Storage: NNNN (hex)
Transfer: NNNN (hex)
0000
0001
00F0
Identification Vendor ID: OVERLAND
Product ID: LXB
TSI
525X ACL
Date DD,MMM,YYYY Current Date
Time HH,MM Current Time
Baud Rate [TSI CE Use Only] 38400
Serial Number NXNNNNNNN 999999999
Unload Mode Implicit, Explicit Implicit
AutoClean Mode Disabled, Enabled Disabled