Figure 5-3, Main menu, Figure 5-4 – HP NonStop G-Series User Manual

Page 46: Configure submenu, Figure 5-5, Set scsi submenu

Installing and Configuring the 5257ACL Tape Drive

5257/5257ACL Installation and User's Guide for NonStop Himalaya S-Series Tape Enclosures — 522344-001

5 -4

Setting the SCSI ID

3. Press the down

button four times to move the cursor

to Configure Menu, then

press Enter. The Configure submenu in

Figure 5-4

appears. Note that the

at the

end of the fourth line means additional configuration options can be reached by
scrolling.

4. To select a configuration option, press the up

or down

scroll buttons on the

control panel to move the cursor

on the display to the option to change. In this

case, select "Set SCSI." Press Enter to display the choices for that option. The
submenu in

Figure 5-5

appears.

5. Note that the Library SCSI ID is set to 3. If the DLT1 bus ID needs to be set to 5,

check that the cursor

is next to line 1, and press the

button repeatedly until the

display scrolls, as shown in

Figure 5-6

Figure 5-3. Main Menu

Figure 5-4. Configure Submenu

Figure 5-5. Set SCSI Submenu

Note. Look closely at the submenu in

Figure 5-5

. Note that the cursor4 on the display is next

to line 1, and that line 2 is indented, indicating that this is a two-tiered menu. The scroll buttons
work on two levels in this type of menu, which is typical of many submenus under Configure
Menu. First - level navigation: when you press the

button is pressed, the

moves to line 3.

Pressing the

button again, you will scroll down to DLT Bus ID. If you press the

button, the

moves back to line 1.

If you press Enter while the

is next to line 1 (or line 3), the scroll buttons operate on the

second level. As a result, the

moves next to line 2 (or line 4), and a

appears at the end of

line 4, indicating that there is a list of options that you can view by scrolling.

0000000000000000000000000000000000000000000000000000000000000000000000000000000000

00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

This manual is related to the following products:

Integrity NonStop H-Series