The dlmchkpath utility for checking hdlm paths, Format, Parameters – HP XP P9500 Storage User Manual
Page 278: The dlmchkpath utility for checking hdlm paths -14, Format -14, Parameters -14, The dlmchkpath utility for, The dlmchkpath utility for checking hdlm, Utility, see

-h
Displays the format of the dlmprsvkey utility.
If you do not specify any parameters, a warning message will appear.
The dlmchkpath Utility for Checking HDLM Paths
If you install or remove HDLM in a multi-path configuration, the disk might
become corrupted. Use the dlmchkpath utility to check HDLM paths and to
make sure that the system is in a single-path configuration. During an
upgrade installation, a re-installation, or removal of HDLM, the dlmchkpath
utility is executed automatically. If the system is in a single-path
configuration, the dlmchkpath utility displays nothing during an upgrade
installation, a re-installation, or removal of HDLM. A warning dialog box will
appear if the system is in a multi-path configuration.
However, when you use one of the following methods of installing HDLM and
the system is determined to be a multi-path configuration, the installation will
terminate without displaying any warning dialog boxes:
•
Upgrade installation using the unattended installation
•
Re-installation using the unattended installation
When the dlmchkpath utility is executed manually, a message will appear as
shown in the execution example in
located in the following location:
HDLM-installation-folder\bin
Format
dlmchkpath {-singleconnect | -h}
Parameters
-singleconnect
Checks whether a single path configuration is being used to connect the
HDLM management-target LU to the host.
Examples
In the following example, the utility determines that the system is in a
single-path configuration:
PROMPT>dlmchkpath -singleconnect
KAPL12401-I All LUs managed by HDLM are in a single path
configuration.
PROMPT>
In the following example, the utility determines that the system is in a
multi-path configuration:
PROMPT>dlmchkpath -singleconnect
7-14
Utility Reference
Hitachi Dynamic Link Manager User Guide for Windows
®