HP XP P9500 Storage - Manual (Page 245)

In a cluster configuration, an offline operation requested during reserve
processing is put into the waiting-to-execute state, and does not execute
until the reserve processing finishes.
#3
This storage system applies when the dynamic I/O path control function is
disabled.
#4
The drive letter assigned to a dynamic disk volume is not displayed.
Table 6-14 Elements of a Path Name
Element Windows representation
Host port number (hexadecimal)
(example: 0004, 0005)
SCSI port number
Bus number (example: 0001) SCSI bus number
Target ID (example: 0000000000000000,
000000000000007A) Target Id
Host LU number (example: 0001) Logical Unit ID or LUN
The path name corresponds to the following information:
¢
Information shown in the Computer Management window
¢
The information in the following registry:
HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\Scsi
Note:
When an FC connection is used, the target ID of a SCSI device is
determined by the HBA configuration. For details on the target ID, see
the relevant documentation, such as the HBA manual.
Table 6-15 Product ID Displayed by the View -path Operation
Model names of
storage systems
Product ID
Without the -stname parameter
With the -stname
parameter
(Displays the
following for the
model ID)
EMC DMX series Product identifier
EMC CX series
HP EVA series
Thunder 9500V series Product identifier # 9500V
Hitachi AMS2000 series AMS
Hitachi AMS series AMS
Command Reference
6-55
Hitachi Dynamic Link Manager User Guide for Windows ®