HP NonStop G-Series - Manual (Page 16)

x6530 Menus
Using the x6530 Emulator
082628 Tandem Computers Incorporated 1–5
x6530 Menus The x6530 Emulator has one standard pop-up menu, with three additional submenus
that cascade down from it: the Custom Commands, Emulator Options, and
Configuration Info menus. These menus are described in this subsection.
When using the x6530 menus, the pointer changes to an arrow (different from the
alternative pointer that can be configured for x6530 operations). On returning from
the menus to the x6530 window, the pointer reverts to its default shape.
x6530 Main Menu The x6530 main menu is shown in Figure 1-2.
Figure 1-2. x6530 Main Menu
002
The x6530 main menu provides options to get information about the current x6530
session, stop an x6530 session, reset the x6530 window without stopping the session,
or select any of the three submenus. To pop up this menu and select an option:
1. Move the pointer to any place inside the x6530 window.
2. Hold down the right mouse button while dragging the pointer to the option you
want. If the option brings a submenu into view, move the pointer into the
submenu, then continue down to the option you want in that menu. When an
option is selected, it takes on a three-dimensional appearance.
3. Release the mouse button to execute the option.
Another way to pop up this menu and select an option as as follows:
1. Place the pointer anywhere in the x6530 window and click the right mouse button.
2. Move the pointer to the desired option or menu title and click the right mouse
button again.
3. If a submenu appears, move the pointer to the desired option in that menu and
click the right mouse button a third time.
The x6530 menu options are described in Table 1-1.