HP NonStop G-Series - Manual (Page 12)

1 Using the x6530 Emulator
082628 Tandem Computers Incorporated 1–1
The x6530 Emulator is a terminal emulator in the X Window System environment that
gives you access to a Tandem system from your workstation. It is analogous to xterm,
the terminal emulator described in the X Window System User’s Guide.
When you have an x6530 window displayed at your workstation, you can log on to a
Tandem host to execute any program or TACL command residing there. You can also
have more than one x6530 window displayed at your workstation at a time.
This section assumes that you or your system administrator has set up x6530 to run
with the command line options and other customizing options you want. It also
assumes that the x6530 run command was executed by one of the methods described
in Section 2, “x6530 Run Command and Customizing Options.”
x6530 Window When x6530 is running, an x6530 window is displayed at your workstation. Figure 1-1
shows the window as it appears with no customization.
Figure 1-1. x6530 Window
001