Getsupportinfo, Description, Syntax – HP StoreVirtual 4000 Storage User Manual
Page 74: Parameters, Response syntax
SNMPCOMMUNITYSTRING ...
SNMPTRAPTARGET ...
Description
Name
This section contains SNMP service policy information.
SNMPSERVICEPOLICY
This section contains SNMP notification policy information.
SNMPNOTIFICATIONPOLICY
This section contains SNMP community string information.
SNMPCOMMUNITYSTRING
This section contains SNMP trap target information.
SNMPTRAPTARGET
Example 138 Windows
cliq getSnmpInfo login=10.1.2.3 userName=admin passWord=secret
Example 139 SSH
getSnmpInfo
getSupportInfo
Description
This command gathers all support log files from a management group and all its member storage
systems. If the specified storage system does not belong to any management group, then only logs
from the storage system will be collected. This command stores the archive locally.
Syntax
getSupportInfo
{login=} { userName= passWord= | groupName= } [filepath=]
Parameters
Description
Name
The IP addresses or DNS-resolvable names of one or more storage systems.
{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
The path to hold the final archive; if not specified, the current directory will
be used.
[filepath]
Response Syntax
INFO ...
FCADAPTER ...
74
Commands