Setdnsinfo, Setemailserverinfo, Setdnsinfo setemailserverinfo – HP StoreVirtual 4000 Storage User Manual
Page 103: Description, Syntax, Parameters
Example 201 Setting an auto-mount policy (Windows)
cliq setAutoMountPolicy groupName=MG1 volumeName=ExchangeVol1
retentionCount=5
Example 202 Setting a mount location (Windows)
cliq setAutoMountPolicy mountPoint=C:\StoreVirtual\RecoveredSnaps
setDnsInfo
Description
Set information for DNS.
CAUTION:
This command overwrites all current values for each parameter.
Syntax
setDnsInfo
{login=} { userName= passWord= | groupName= } [domainname=]
[suffix=] {server=}
Parameters
Description
Name
The IP addresses or DNS-resolvable names of one or more storage systems.
{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
The domain name.
[domainname]
DNS suffixes.
[suffix]
List of DNS servers, IP addresses.
{server}
Example 203 Windows
cliq setDnsInfo login=10.0.1.3 userName=admin passWord=secret
server=10.23.0.101 suffix=suffix1;suffix2 domainname=domainname
Example 204 SSH
setDnsInfo server=10.23.0.101 suffix=suffix1;suffix2
domainname=domainname
setEmailServerInfo
Description
Set the configuration information for the email server used to email alerts to configured recipients.
setDnsInfo 103