HP StoreVirtual 4000 Storage - Manual (Page 23)

Description Name
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters. {groupName}
The password for the storage system. Required when the userName
parameter is used. {passWord}
Example 19 Windows
cliq clearSnmpNotifyPolicy login=10.0.1.3 userName=admin passWord=secret
Example 20 SSH
clearSnmpNotifyPolicy
clearSnmpServiceInfo
Description
Clear the SNMP Server information.
Syntax
clearSnmpServiceInfo {login=} { userName= passWord= | groupName= }
Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters. {groupName}
The password for the storage system. Required when the userName
parameter is used. {passWord}
Example 21 Windows
cliq clearSnmpServiceInfo login=10.0.1.3 userName=admin passWord=secret
Example 22 SSH
clearSnmpServiceInfo
clearVssVolumeFlags
Description
Clear all volume shadow copy service (VSS) snapshot information from the disk. This command is
only supported for Windows Server 2008 and higher.
Syntax
clearVssVolumeFlags {volumeName=}
clearSnmpServiceInfo 23