HP StoreVirtual 4000 Storage - Manual (Page 111)

Example 223 Windows
cliq startManager login=10.0.1.2 userName=admin passWord=secret
Example 224 SSH
startManager
startSnmpService
Description
Start the SNMP Service.
Syntax
startSnmpService {login=} { userName= passWord= | groupName= }
Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters. {groupName}
The password for the storage system. Required when the userName
parameter is used. {passWord}
Example 225 Windows
cliq startSnmpService login=10.0.1.2 userName=admin passWord=secret
Example 226 SSH
startSnmpService
startVirtualManager
Description
Start a virtual manager on a storage system.
Syntax
startVirtualManager {login=} { userName= passWord= | groupName= }
Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
startSnmpService 111