Getnsmlogs, Response syntax, Description – HP StoreVirtual 4000 Storage User Manual
Page 64: Syntax, Parameters
Description
Name
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
Response Syntax
NSM ...
FIBRECHANNEL ...
NIC ...
BONDTYPE ...
GOSSIPADDRESS ...
RAIDSETTING ...
Description
Name
This section contains storage system information.
NSM
This section contains Fibre Channel information.
FIBRECHANNEL
This section contains NIC information.
NIC
This section contains supported bond type information.
BONDTYPE
This section contains gossip address information.
GOSSIPADDRESS
This section contains supported RAID type information.
RAIDSETTING
Example 116 Windows
cliq getNsmInfo login=10.1.2.3 userName=admin passWord=secret
Example 117 SSH
getNsmInfo
getNsmLogs
Description
This command gathers all log files from a storage system and stores the archive locally.
Syntax
getNsmLogs
{login=} { userName= passWord= | groupName= } {logFile=}
Parameters
Description
Name
The IP addresses or DNS-resolvable names of one or more storage systems.
{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
64
Commands