Getsnmpinfo, Response syntax, Description – HP StoreVirtual 4000 Storage User Manual
Page 73: Syntax, Parameters

Description
Name
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
The name of the schedule.
[scheduleName]
Response Syntax
SCHEDULE ...
Description
Name
This section contains schedule information.
SCHEDULE
Example 136 Windows
cliq getSnapshotScheduleInfo login=10.0.1.3 userName=admin
passWord=secret
Example 137 SSH
getSnapshotScheduleInfo
getSnmpInfo
Description
Get information about the SNMP Service and Targets.
Syntax
getSnmpInfo
{login=} { userName= passWord= | groupName= }
Parameters
Description
Name
The IP addresses or DNS-resolvable names of one or more storage systems.
{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
Response Syntax
SNMPSERVICEPOLICY ...
SNMPNOTIFICATIONPOLICY ...
getSnmpInfo
73