HP StoreVirtual 4000 Storage - Manual (Page 49)

Example 80 Windows
cliq deleteSnapshotSchedule scheduleName="Exchange Backup" login=10.1.2.3
userName=admin passWord=secret
Example 81 SSH
deleteSnapshotSchedule scheduleName="Exchange Backup"
deleteSnapshotTempSpace
Description
Delete the snapshot temporary space.
CAUTION:
•
This operation is irreversible.
•
This command will display a prompt, requiring confirmation before proceeding. This prompt
may be overridden with an optional prompt=0 parameter on the command line; in this case,
the command will always execute without pausing for confirmation.
Syntax
deleteSnapshotTempSpace {login=} { userName= passWord= | groupName= }
{snapshotName=}
Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters. {groupName}
The password for the storage system. Required when the userName
parameter is used. {passWord}
The name of the remote snapshot. {snapshotName}
Example 82 Windows
cliq deleteSnapshotTempSpace snapshotName=TheSnapshot login=10.1.2.3
userName=admin passWord=secret
Example 83 SSH
deleteSnapshotTempSpace snapshotName=TheSnapshot
deleteSnmpCommunityString
Description
Delete an SNMP CommunityString. Either specify an IP address (as IP address or host name) or IP
mask and IP subnet.
deleteSnapshotTempSpace 49