HP StoreVirtual 4000 Storage - Manual (Page 47)

Syntax
deleteSite {login=} { userName= passWord= | groupName= } {siteName=}
Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters. {groupName}
The password for the storage system. Required when the userName
parameter is used. {passWord}
The name of the site. {siteName}
Example 76 Windows
cliq deleteSite siteName=Headquarters login=10.1.2.3 userName=admin
passWord=secret
Example 77 SSH
deleteSite siteName=Headquarters
deleteSnapshot
Description
Delete a snapshot.
CAUTION:
•
This operation is irreversible.
•
This command will display a prompt, requiring confirmation before proceeding. This prompt
may be overridden with an optional prompt=0 parameter on the command line; in this case,
the command will always execute without pausing for confirmation.
Syntax
deleteSnapshot {login=} { userName= passWord= | groupName= } {snapshotName=}
Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters. {groupName}
deleteSnapshot 47