HP Integrity NonStop H-Series - Manual (Page 138)

Managing Tables 12-4
5. Enter the maximum number of extents in the Max Extents field.
6. Enter the data and time until which the table cannot be purged in the
NoPureUntil field.
7. Enter the numeric table code in the Table Code field.
8. Enable or disable audit by licking on Audit.
9. Enable or disable audit compression by clicking on Audit Compress.
10. Enable or disable buffered disk-writes by clicking on Buffered.
11. Enable or disable clear-on-purge by cliking on Clear On Purge.
12. Enable or disable data compression by clicking on Dcompress.
13. Enable or disable index compression by clicking on Icompress.
14. Enable or disable serial writes by clicking on Serial Writes.
15. Enable or disable verified-writes by clicking on Verified Write.
16. Enable or disable similarity checks by clicking on Similarity Check.
Choose Table Format
Choose Format of a table by clicking either Format1 or Format2 in
Format Pane.
Choose Partition Array:
You can choose anyone partition Array by clicking any of the
option buttons in Partition Array Pane.