HP StorageWorks EVA Controller HSG V8.8 Software - Manual (Page 84)

Using the Storage Window
84 Command Console V2.5 User Guide
CLI Window
The CLI is a text-based interface utility for monitoring and configuring your
storage subsystem. Because the configuration of the storage subsystem can be
changed using CLI commands, HP recommends that you allow CLI access only to
users who are familiar with CLI operation.
The CLI window, as shown in Figure 11 has a command-entry area and a
command-response area below it. You can enter commands in the command-entry
area, and the controller responds with the results of the entry in the response area.
Figure 11: CLI Window