Figure 4: connection selection dialog box, Figure 5: connect serial window, Figure 4 – HP StorageWorks EVA Controller HSG V8.8 Software User Manual
Page 32
About SWCC
32
Command Console V2.5 User Guide
Figure 4: Connection Selection dialog box
2. When the Connection Selection window opens, choose Serial and then click
OK. The Connect Serial window opens, as shown in
.
3. From the drop-down menu, choose the COM port connected to the RAID
HS-Series controller.
4. Choose a controller baud rate, a Subsystem Physical View, or a Subsystem
Grid View. Click Connect. When the Storage window opens, you are
connected to your subsystem.
Figure 5: Connect Serial window
This manual is related to the following products: