HP StorageWorks EVA Controller HSG V8.8 Software - Manual (Page 23)

About SWCC
23 Command Console V2.5 User Guide
Command Console Client Minimum Hardware and Software
Requirements
The minimum requirements to run the Command Console client properly are
listed in
Table 4 .
* Although it is possible to use the Client on a system with standard, VGA resolution, HP
recommends that you use SVGA. The Storage window requires a minimum amount of
screen space to properly display its contents. When you use VGA display resolution,
screen space becomes more limited. For more information, see "Storage Window
Display" , page 67
Table 4: Minimum Hardware and Software Requirements
Item Requirements
Management Station Suggested minimum of a Pentium class system with 64
MB of RAM.
Operating System Microsoft Windows NT 4.0 Windows 2000, and
Windows Server 2003 (32-bit). Please refer to the
SWCC Quickspecs for the latest service pack
requirements.
Monitor SVGA at 800x600 resolution, minimum*
Modem Hayes-compatible (for event notification)
Serial Port RS-232 (for local connection)
Network Adapter TCP/IP-compatible network card (for distributed systems
only)
Controller
Compatibility
HSG80, HSG60
Host Software ASPI SCSI driver required for host port virtual terminal
connection (Windows NT only)