HP Storage Mirroring Software - Manual (Page 58)

Migration Page 57 of 135
E-mailing event messages
E-mail notification sends specific Storage Mirroring Data Migration events to user-
defined e-mail addresses. If you want to use e-mail notification, you will need to identify
who will receive the messages, what messages they will receive, and your e-mail server
configuration.
l
Server—Select the server that you want to configure e-mail notifications for. E-mail
notification settings apply to all jobs for a server. Multiple jobs using the server will
share the same e-mail notification settings.
l
Recipients—Specify the e-mail address that each Storage Mirroring Data
Migration e-mail message should be sent to and click Add New. The e-mail
address will be inserted into the list of addresses. Each address is limited to 256
characters, and you can add up to 256 e-mail addresses. If you want to remove an
address from the list, highlight the address and click Remove. If you want to
remove all of the addresses from the list, click Clear.
l
Notifications—Specify which events that you want to be sent via e-mail. You can
select Error, Warning, and/or Information. If you have enabled manual cutover,
so that user intervention is required before cutover, and you have configured e-mail
notification, you will receive notifications when the migration mirror is complete and
cutover is ready, regardless of the notification events you have selected.
l
Mail Server Setup—Specify your e-mail server configuration.