Configuring and managing smb shares with the cli, Adding, modifying, or deleting shares – HP StoreAll Storage User Manual

Page 85

On the CIFS Shares panel, click Add or Modify to open the File Shares wizard, where you can
create a new share or modify the selected share. Click Delete to remove the selected share. Click
CIFS Settings to configure global file share settings; see

“Configuring SMB signing ” (page 83)

)

for more information.

You can also view SMB shares for a specific file system. Select that file system on the GUI, and
then select CIFS Shares from the lower Navigator.

Configuring and managing SMB shares with the CLI

Adding, modifying, or deleting shares

Use the ibrix_cifs command to add, modify, or delete shares. For detailed information, see
the

HP StoreAll Storage CLI Reference Guide

NOTE:

Be sure to use the ibrix_cifs command located in /bin.

The ibrix_cifs command located in /usr/local/bin/init is used internally by StoreAll
software and should not be run directly.

Add an SMB share:

ibrix_cifs -a -f FSNAME -s SHARENAME -p SHAREPATH [-D SHAREDESCRIPTION]

[-S SETTINGLIST] [-A ALLOWCLIENTIPSLIST] [-E DENYCLIENTIPSLIST] [-F

FILEMODE] [-M DIRMODE] [-h HOSTLIST]

SMB shares