beautypg.com

25 scsi termination on a single ultrium tape drive – HP StoreEver Ultrium Tape Drives User Manual

Page 73

background image

Figure 25 SCSI termination on a single Ultrium tape drive

If you have more than one device on the SCSI bus, daisy-chain them by connecting an LVD-rated cable

from the SCSI-OUT connector on the first device to the SCSI-IN connector on the second device. Assuming

you have two Ultrium tape drives connected, the enclosure on the second drive provides termination.

The green Act TERM LED on the rear of the first drive will be off while on the rear of the second drive it

will be on. If the second device is not an Ultrium external drive, make sure that it is terminated using an

LVD-rated multimode terminator.

Ultrium Half-Height SCSI Tape Drives

73