HP StoreEver Ultrium Tape Drives - Manual (Page 44)

1. Arrow indicates leading direction 2. Label area
3. Cartridge door 4. Ready light
Figure 19 Inserting a cartridge
2. Apply gentle pressure until the drive takes the cartridge and loads it. (See
“ Inserting a cartridge ” on page 44.)
3. The Ready light flashes green while the drive performs its load sequence. When the cartridge is
loaded, the Ready light shows steady green.
Unloading a cartridge
CAUTION:
Never try to remove a cartridge before it is fully ejected.
1. Press the Eject button on the front panel.
44 Operating your tape drive