HP StoreEver Ultrium Tape Drives - Manual (Page 43)

7 Operating your tape drive
In this chapter:
• “ Your HP StorageWorks tape drive ” on page 43
• “ Loading a cartridge ” on page 43
• “ Unloading a cartridge ” on page 44
• “ Removing power from the drive ” on page 45
Your HP StorageWorks tape drive
See also “ Understanding LED sequences ” on page 62.
1. Cartridge door 5. Drive LED
2. On/Off switch (external drives only) 6. Ready LED
3. Clean LED 7. Eject button
4. Tape LED
Figure 18 Front view of half-height Ultrium external tape drive
Loading a cartridge
1. Lift the cartridge door and insert the cartridge into the slot in the front of the drive with the white
arrow uppermost and facing the drive door.
Ultrium Half-Height SCSI Tape Drives 43