beautypg.com

9 securing drive, no mounting hardware used, Figure 9 – HP StoreEver Ultrium Tape Drives User Manual

Page 29

background image

1

M3 screws, supplied with tape drive

Figure 9 Securing drive, no mounting hardware used

NOTE:

Use the 3 mm screws supplied with the tape drive and, if you cannot tighten the screws, use

washers to secure them.

2.

Ensure blanking plates are in place over empty bays and replace the cover on the server.

Ultrium Half-Height SCSI Tape Drives

29

See also other documents in the category HP Storage: