Operational overview, Overview, New features – HP ProLiant DL145 G3 Server User Manual
Page 5: Server management, Server management features

Operational overview 5
Operational overview
Overview
This guide discusses the standard and optional operational features of the LO100 used in HP ProLiant
ML110 G4, ProLiant ML115 G1, ProLiant DL140 G3, ProLiant DL145 G3, and ProLiant ML150 G3
servers.
New features
This release of LO100 adds support for the following:
•
Updated user interface
•
Update CLP support
•
Updated Java™ support to include JRE 1.4.2 up to 1.6
•
Updated remote console mouse control
Server management
HP ProLiant Lights-Out 100 delivers basic remote control of vital server resources, supports IPMI 2.0, and
provides system administrators with access to the server at any time, even before an operating system is
installed on the server.
HP ProLiant Lights-Out 100 provides text mode console redirection, DMTF SMASH compliant command
line interface, and browser access to many of the same system management functions. You can access
LO100 through a dedicated Ethernet port or through the server serial port.
Server management features
With HP ProLiant Lights-Out 100, you can perform the following tasks:
•
Access a remote graphic console (Virtual KVM)
•
Access the serial console of the host operating system over the network using standards-based client
utilities
•
Switch between serial console redirection or the LO100 command line interface
•
Communicate securely using SSL and SSH
•
Remotely control the power button of the server (power on and off the server), or perform warm or
cold server reboots
•
Remotely monitor fan speed and system power state (S0 or S5)
•
Access the system event log