Changing user settings through a web browser – HP ProLiant DL145 G3 Server User Manual
Page 47
Using LO100 47
nonvolatile memory and can be changed through a web browser ("
Changing user settings through a web
Changing user settings through the CLP
When using CLP, if you do not have the correct privileges a warning message appears. If you receive a
warning message, you must end the telnet connection and re-establish a connection. There are no
restrictions when logged in as either OEM or administrator. User and operator accounts have the
following access.
Option User
Operator
Hardware Inventory
Yes
Yes
Virtual Power
No
Yes
Monitoring Sensors
View only
Yes
System Event Log
Yes
Yes
Network Settings
No
No
PET Configuration
No
No
User Configuration
No
No
Virtual KVM
No
No
Application License Key
No
No
Security Settings
No
No
Changing user settings through a web browser
The User Administration screen displays user information, enables you to modify user settings, and enable
or disable user accounts. The first user account is a fixed null value. You cannot change the properties of
the first user or use it to log in. Only the first two users (after the fixed null value) are enabled for login by
default. Users can only be enabled from the browser interface.
WARNING:
Do not disable all user accounts. If you disable all user accounts you will not be
able to log in to LO100. HP recommends always leaving at least one user with administrative
privileges.
To modify user settings:
1.
On the main menu navigation bar, click User Administration.
2.
Enter the password in the Password and Confirm Password fields.