Canon PowerShot ELPH 130 IS - Manual (Page 72)

72
1
2
3
4
5
6
7
8
9
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Playback Mode
Cover
5
Advanced Guide
Playback Mode
Still Images
Auto Playback of Similar Images (Smart Shuffle)
Based on the current image, the camera offers four images similar to it that you
may wish to view. After you choose to view one of those images, the camera offers
four more images. This is an enjoyable way to play back images in an unexpected
order. Try this feature after you have taken many shots, in many kinds of scenes.
1 Choose Smart Shuffle.
z z Press the < m> button, and then choose
[ ] in the menu ( = 27).
X X Four candidate images are displayed.
2 Choose an image.
z z Press the < o>
buttons to
choose the image you want to view next.
X X Your chosen image is displayed in the
center, surrounded by the next four
candidate images.
z z For full-screen display of the center image,
press the < m> button. To restore the original
display, press the < m> button again.
z z Press the < n> button to restore
single-image display.
• Only still images shot with this camera are played back using Smart Shuffle.
• Smart Shuffle is not available in the following cases:
- There are less than 50 shots taken with this camera
- An unsupported image is currently displayed
- Images are shown in filtered display ( = 69)
Still Images Movies
Protecting Images
Protect important images to prevent accidental erasure by the camera
( = 74).
z z Press the < m> button, and then choose
[ :] in the menu ( = 27). [Protected]
is displayed.
z z To cancel protection, repeat this process
and choose [ :] again, and then press
the < m> button.
• Protected images on a memory card will be erased if you format the
card ( = 109, 110).
• Protected images cannot be erased using the camera’s erasure function. To
erase them this way, first cancel protection.
Using the Menu
1 Access the setting screen.
z z Press the < n> button and choose
[Protect] on the [ 1] tab ( = 28).
COP
Y