Canon PowerShot ELPH 130 IS - Manual (Page 64)

64
1
2
3
4
5
6
7
8
9
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Playback Mode
Cover
Advanced Guide
4
P Mode
Flash
Still Images
Activating Flash
You can have the flash fire for each shot. For details on the flash range, see
Flash Range ( = 142).
Configure the setting.
z z Press the < r> button, press the
buttons to choose [ h], and then press the
< m> button.
X X Once the setting is complete, [ h] is
displayed.
Still Images
Shooting with Slow Synchro
With this option, the flash fires to increase the brightness of the main
subject (such as people) while the camera shoots at a slow shutter speed to
increase the brightness of the background that is out of the flash range.
For details on the flash range, see Flash Range ( = 142).
1 Configure the setting.
z z Press the < r> button, press the
buttons to choose [ Z], and then press
the < m> button.
X X Once the setting is complete, [ Z] is
displayed.
2 Shoot.
z z Even after the flash fires, ensure that
the main subject does not move until the
shutter sound is finished playing.
• Mount the camera on a tripod or take other measures to keep it still
and prevent camera shake. Additionally, you should set [IS Mode]
to [Off] when using a tripod or other means to hold the camera still
( = 65).
Still Images
Shooting with the FE Lock
Just as with the AE lock ( = 55), you can lock the exposure for the flash
shots.
1 Set the flash to [h] ( = 64).
2 Lock the flash exposure.
z z Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
< o> button.
X X The flash fires, and when [ (] is
displayed, the flash output level is
retained.
z z To unlock FE, release the shutter button
and press the < o> button again. In this
case, [ (] is no longer displayed.
3 Compose the shot and shoot.
• FE: Flash Exposure
COP
Y