52), or connected, Cop y – Canon PowerShot ELPH 130 IS User Manual
Page 52
52
1
2
3
4
5
6
7
8
9
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Playback Mode
2
Compose the shot and press
the shutter button halfway.
z
z
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the
way down.
X
X
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
X
X
The lamp blinks and the self-timer sound
is played.
4
Join the subjects in the
shooting area and look at the
camera.
X
X
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
z
z
To cancel shooting after you have
triggered the self-timer, press the
<
n> button.
•
Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
•
To change the number of shots, press the <
o>
buttons after choosing
[
] in step 1. [Blink Detection] (
41) is only available for the final shot.
Still Images
Shooting Long Exposures (Long Shutter)
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
1
Choose [N].
z
z
Follow steps 1 – 2 in “Specific Scenes”
N].
2
Choose the shutter speed.
z
z
Press the <
o> button, press the
<
q>
speed, and then press the <
m> button.
3
Check the exposure.
z
z
Press the shutter button halfway to view
the exposure for your selected shutter
speed.
4
Shoot.
•
On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your shots.
•
With shutter speeds of 1.3 seconds or slower, there will be a delay
before you can shoot again, as the camera processes images to
reduce noise.
•
Set [IS Mode] to [Off] when using a tripod or other means to hold the
camera still (
COP
Y