Synchronizing the time, Cop y – Canon Wireless File Transmitter WFT-E7A User Manual
Page 91
91
Steps 1–5 are the same on master and slave cameras.
1
In the menu, select [Communication
settings].
2
Select [Network settings].
3
Set [Communication mode] to
[Disconnect].
Once [Communication mode] is set to
[Disconnect], you can select [Sync time between
cameras].
4
Select [Sync time between cameras].
X
Select [OK] on the next screen displayed, shown
below.
5
Select [LAN Type].
After selecting [Wireless] or [Wired], select [OK].
Synchronizing the Time
COP
Y