Canon Wireless File Transmitter WFT-E2 II A User Manual
Cop y, Wft-e2 ii
![background image](/manuals/379727/1/background.png)
E
INSTRUCTION MANUAL
Wireless File Transmitter
WFT-E2 II
Instruction Manual for Use With
EOS-1D Mark III or EOS-1Ds Mark III
To EOS-1D Mark IV Users
This instruction manual describes the use of the transmitter when connected to the EOS-1D
Mark III or EOS-1Ds Mark III.
When using the transmitter with the EOS-1D Mark IV, refer to the PDF manual in the
EOS_1DIV folder.
Before using the WFT-E2 II with an EOS-1D Mark III or EOS-1Ds Mark III, make sure the
camera firmware is Ver. 1.3.0 or later for the EOS-1D Mark III and Ver. 1.2.0 or later for the
EOS-1Ds Mark III.
For details, contact a Canon Service Center.
To comply with local radio wave regulations, Canon offers four region-specific versions of
the transmitter (WFT-E2 IIA, E2 IIB, E2 IIC, and E2 IID) in various areas around the world
(p.6). For convenience, we refer to the product in this manual simply as “the transmitter,”
without reference to versions A, B, C, or D.
COP
Y
Document Outline
- Introduction
- Conventions Used in this Manual
- Areas of Use and Restrictions
- Safety Warnings
- Nomenclature
- Attaching to the Camera
- Subsequent Organization of This Manual
- Basic Network Settings
- Transferring Images to an FTP Server
- Remote Capture Using EOS Utility
- Remote Capture Using WFT Server
- Managing Settings Information
- Using External Media
- Using GPS Devices
- Troubleshooting
- Reference