Canon Wireless File Transmitter WFT-E7A - Manual (Page 71)

71
Shoot with the master camera linked to slave cameras as follows.
1 Set up the master camera.
Configure the settings on the master camera
following steps 1-3 on the preceding page, and
then select [Master].
2 Select [Auto connect].
For [Manual connect] instructions, see page 75.
3 Set up the slave cameras.
On the slave cameras, select [OK].
4 Check the number of slave cameras.
X On the master camera LCD monitor, the number of
slave cameras detected is displayed.
5 Establish the connection.
On the master camera and all slave cameras,
select [OK].
X A screen confirming the connection of the camera
is displayed.
Settings information is stored on the cameras. It is
not stored on the transmitters.
Basic Linked Shooting
COP
Y