Canon Wireless File Transmitter WFT-E7A - Manual (Page 82)

82
Using the Transmitter with WFT Server
4 Select the language.
Select a language on the bottom of the screen.
Web browsers that support JavaScript will display
the screen on the left.
A message is displayed when JavaScript is not
supported. Selecting not to use JavaScript will
display the screen on the right, with limited
functions.
See “Viewing Images” on page 57.
Images on camera memory cards can be viewed and downloaded. To switch cameras,
enter the IP address of the master or slave camera in the web browser.
See “Remote Capture [Camera control]” on page 59. Remote capture as described on
pages 62 and 63 is also possible.
To switch cameras, enter the IP address of the master or slave camera in the web browser.
You can access slave cameras, adjust the focus and configure shooting functions, and then
use the master camera for linked shooting.
When shooting remotely with linked shooting, access the master camera. If you connect to a
slave camera, only that slave camera will shoot, without linked shooting.
View Images on the Camera
Shoot Remotely
COP
Y