Canon Wireless File Transmitter WFT-E7A - Manual (Page 117)

117
Specifications
Network Functions
FTP transfer: Automatic transfer
Image selection and transfer
Transfer using SET button
Transfer with captions
EOS Utility: EOS Utility remote control functions over wireless and wired LAN
WFT Server: Camera control, simple control, basic shooting,
image viewing, and downloading
Media Server: DLNA compatible
Linked shooting: Shooting with up to 10 slave cameras linked to a master camera
Transmission range: Approx. 100 m / 328 ft. (wireless LAN only)
Wireless time synchronization: Synchronizing up to 10 slave cameras to the master camera time
Margin of error with master camera: Approx. ±0.05 seconds
Bluetooth connection
Standards compliance: Bluetooth 2.0+EDR
Supported devices: Wireless connectivity with Bluetooth GPS devices
Power Source
Battery: Battery Pack LP-E6; One battery is used.
Battery check: Automatic
Number of images
that can be transferred
Approx. number of images
* Using a fully charged LP-E6.
* When automatic transfer is performed during shooting of an image of
approx. 5 MB under conditions based on the CIPA (Camera &
Imaging Products Association) test standards.
* Fewer images can be transferred when transferring images
continuously over a wireless LAN.
Dimensions and Weight
Dimensions (W x H x D): 134.1 x 31.1 x 62.2 mm / 5.3 x 1.2 x 2.4 in.
Weight: Approx. 165 g / 5.8 oz. (body only)
Operating Environment
Temperature: 0°C–40°C / 32°F–104°F
Humidity: 85% or less
All preceding specifications are based on Canon testing standards.
Transmitter specifications and appearance are subject to change without notice.
LAN
At Normal Temperature
(23°C / 73°F)
At Low Temperature
(0°C / 32°F)
Wireless LAN 2400 2300
Wired LAN 2200 2200
COP
Y