Canon XA10 - Manual (Page 45)

Recording Movies and Photos
45
Recording in y (Manual) Mode
When the mode switch is set to y (Manual mode), you can enjoy full access to the menus and
manually adjust the exposure, focus, white balance and many more of the camcorder’s settings to
your preference. Even in
mode, though, the camcorder can help you with the settings. For
example, by using Special Scene recording programs ( 0 68).
1 Set the mode switch to y.
2 Turn on the camcorder.
3 Record movies and photos.
• The procedure is the same as in mode ( 0 41).
Reviewing the Latest Scene Recorded
You can review the last 4 seconds of the last scene recorded with the camcorder without switching to
playback mode. While reviewing the latest scene, the picture will be played back without sound.
1 Set the mode switch to y or .
2 Review the last 4 seconds of the scene.
[FUNC.] [ Review Recording]
NOTES
• When double slot recording is activated, only the scene recorded on memory card X will be played
back.
Operating modes:
Operating modes:
COP
Y