Canon XA10 - Manual (Page 142)

Uploading Movies to Video Sharing Web Sites
142
NOTES
• Depending on the amount of data to be uploaded and the network’s wireless connection
conditions, it can take some time to upload video files. If the wireless connection is too weak, the
wireless upload may fail and the video files will be registered as incomplete uploads.
• About power saving:
- Wireless communication drains the power of the battery pack faster than usual. We recommend
powering the camcorder using the compact power adapter.
- While files are being uploaded wirelessly, the camcorder’s automatic power off function will be
disabled.
• Wirelessly uploading files is not possible when the Eye-Fi card is in memory card slot X (the Eye-Fi
icon will not appear on the screen). Be sure to insert the Eye-Fi card into memory card slot Y.
• While using an Eye-Fi Card, the ACCESS indicator may flash from time to time.
• Wireless communication is available only in playback mode. Any wireless transfer in progress will be
stopped if you set the camcorder to recording mode.
• Wireless communication is not available when the optional WM-V1 Wireless Microphone is attached
to the camcorder. Any wireless transfer in progress will be stopped the moment you attach the
WM-V1 to the camcorder.
• You can turn off the wireless communication with the 6 [Eye-Fi Communication]* setting.
• If the LOCK switch on the Eye-Fi card is set to prevent writing, you will not be able to turn the
wireless communication on/off and the status icon will change to o. To use wireless
communication make sure the switch on the Eye-Fi card is not in the LOCK position.
* This menu option will appear only when using an Eye-Fi card.
COP
Y