Canon XA10 - Manual (Page 38)

Using a Memory Card
38
NOTES
• You cannot use relay recording from the built-in memory to memory card Y. When using a single
memory card, be sure to insert it into memory card slot X.
• There will be a momentary stop in the scene at the point where the camcorder switches from one
memory to another.
• Any of the following actions will deactivate the relay recording function:
- Turning off the camcorder.
- Opening the double memory card slot cover.
- Changing the position of the mode switch.
- Changing the camcorder’s operating mode.
- Changing the memory used for recording movies.
Double Slot Recording
Double slot recording allows you to record the same scene simultaneously to both memory cards. This
is a convenient way to make a backup copy of your recording while you record.
1 Insert memory cards into memory card slot X and memory card slot Y.
2 Open the [Rec Media for Movies] screen.
[FUNC.] [MENU] 8 [Rec Media for Movies]
3 Activate double slot recording.
[4] [Double Slot Rec] [A]
4 Touch [a].
• will appear on the screen.
NOTES
• If a memory card becomes full during double slot recording, recording on both cards will stop.
• If an error occurs with one of the memory cards, recording will continue on the other card.
Operating modes:
COP
Y