Write to card, Print setup – Brother PE-DESIGN Ver.432 User Manual
Page 138
128
■
Write to Card
Purpose:
Writes your Design Page to an original card.
Shortcut key:
Toolbar:
Operation:
1
Click
File
, then
Write to Card
.
This message will display.
If the card module is not connected, this message displays.
2
If you click
OK
, your current embroidery patterns will be saved on the card. A
Now writing
message
displays while the data is being transferred to the card.
After a while, the following message will appear.
See also:
“Save” on page 126, “Save As” on page 127
■
Print Setup
Purpose:
Allows you to change the printing settings for previewed embroideries.
Shortcut key:
No shortcut key for this function
Toolbar:
No button for this function
◆
If the card is not brand new, make sure
that you want to erase the data that is
already stored on the card and click
OK
.
◆
Click
Cancel
to exit.
◆
Correct the problem, then click
Retry
.
◆
Click
Cancel
to exit.
◆
Click
OK
.
F4