Transform level – Brother PE-DESIGN Ver.432 User Manual
Page 123
113
Operation:
1
Type the desired value in the Text size selector (5 ~ 100 mm or 0.20 ~ 3.93 inches) and press the
key
or
click on the Text size selector to display the available values.
2
Click the desired value.
The setting applies to all the text patterns that you will create in the Text Input mode until you
change the setting.
If a text pattern or characters of a text pattern are selected, the setting also applies to the selec-
tion.
See also:
“Text Input Mode” on page 101, “Point Edit Mode” on page 97
■
Transform level
Purpose:
Selects the level of transformation.
Available:
When you select an existing transformed text with the cursor in Selection mode.
Operation:
1
Type the desired value in the Transform level selector (0 ~ 100%) and press the
key
or
click on the Transform level selector to display the available values.
2
Click the desired value.
The setting applies to all the transformed text patterns that you will create in the Text Input mode
until you change the setting.
If a text pattern is selected, the setting also applies to the selection.
See also:
“Text Input Mode” on page 101 and “Transform Text” on page 142
Enter
Enter
50%
100%