Color, Special colors – Brother PE-DESIGN Ver.432 User Manual
Page 127
117
■
Color
Purpose:
Sets the thread color for outline, region inside, text, manual punching pattern and
imported pattern (after the Stitch to Block function has been applied).
Available:
When the cursor is in Selection mode with nothing selected, the
Line color
and
Region color
buttons are displayed (if they have not been turned off with the Line
sew or Region sew buttons).
When you start one of the drawing modes or Text Input mode, or select an existing
pattern, the Color button for the corresponding pattern appears.
Operation:
1
Click the color button.
In Region setting mode, the
Region Thread Color
dialog displays and in Line setting mode, the
Line
Thread Color
dialog displays. The same color settings are available in both dialogs.
The setting applies to all the patterns of the same categories that you will create until you change
it. The color button of each category shows the current color for that category.
If a pattern is selected, the setting also applies to that pattern.
Note that the color name shown on the dialog will be displayed on sewing machines that can dis-
play color names.
See also:
“Line sew” on page 115 and “Region sew” on page 116
Special colors
◆
Click the desired color.
•
The four last spools have a special function.
See “Special colors” below.
•
For a list of the different color names, see
page 179.
◆
Click
OK
to confirm.
◆
Click
Cancel
to exit.
NOT DEFINED
APPLIQUE MATERIAL
APPLIQUE POSITION
APPLIQUE