Brother NX 600 - Manual (Page 38)

GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
32
e
Pull out about 5 cm (2 inch) of the bobbin
thread under the presser foot toward the rear
of the machine.
f
Reattach the bobbin cover.
Insert the tab in the lower-left corner of the
bobbin cover, and then lightly press down on
the right side.
2
1
F3dash-BrotherE_sgml.book Page 32 Friday, September 5, 2003 5:46 PM