Brother NX 600 - Manual (Page 30)

GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
24
Upper Threading
In this section, the procedures for positioning the spool for the upper thread and threading the needle are
described.
CAUTION
Memo
z The order that the machine should be
threaded is indicated by a solid line on the
sewing machine. Be sure to thread the
machine as indicated.
Threading the upper thread
a
Turn on the sewing machine.
b
Raise the presser foot lever.
a Presser foot lever
X The presser foot is raised.
• If the presser foot is not raised, the sewing
machine cannot be threaded correctly.
● When threading the upper thread,
carefully follow the instructions. If the
upper threading is not correct, the thread
may become tangled or the needle may
bend or break.
1
F3dash-BrotherE_sgml.book Page 24 Friday, September 5, 2003 5:46 PM