Brother NX 600 - Manual (Page 36)

GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
30
m
Press (OK key).
X The screen for selecting the twin needle
appears.
n
Press to select .
To return to , press .
X The twin needle can now be used.
o
Press (OK key).
X The initial stitch screen appears again, and
appears in the lower-left corner of the
screen.
• Even after the sewing machine is turned off,
the twin needle setting is not cancelled.
CAUTION
p
Select a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 66).
• For details on the stitches that can be sewn
with the twin needle, refer to "Stitch Settings"
(page 132).
CAUTION
q
Start sewing.
• For details on starting to sew, refer to
"Starting to sew" (page 48).
X Two lines of stitching are sewn parallel to
each other.
CAUTION
● When using the twin needle, be sure to
select the twin needle setting, otherwise
the needle may break or the machine may
be damaged.
● When using the twin needle, be sure to
select an appropriate stitch, otherwise the
needle may break or the machine may be
damaged.
● When changing the sewing direction,
press (Needle position button) to
raise the needle from the fabric, and then
raise the presser foot lever and turn the
fabric.
F3dash-BrotherE_sgml.book Page 30 Friday, September 5, 2003 5:46 PM